大约 4 分钟
hetzner
德国服务器提供商，价格友好。如果是节点服务器可以使用 robot 专用服务器。
1. 注册账号
不要使用代理注册！不然会被机器封号的。
Dear xxx
Please sign up again and do NOT use a VPN/proxy during registration.
Kind regards
Customer Data Analytics
Hetzner Online GmbH Sigmundstrasse 135 90431 Nürnberg info@hetzner.com > www.hetzner.com
Register Court: Registergericht Ansbach, HRB 6089 CEO: Martin Hetzner, Stephan Konvickova, Günther Müller
For the purposes of this communication, we may save some of your personal data. For information on our data privacy policy, please see: https://www.hetzner.com/de/privacy-policy-notice
2. 申请专用服务器
如果是需要大硬盘，可以自己添加，默认安装的是救援系统，需要自己安装服务器系统。
在这个界面能看到自己的服务器 https://robot.hetzner.com/server
3. 重装服务器
这里安装的是 linux，如果是 Windows，服务器控制面板可以安装，不过需要额外的付费，应该可以 dd 到任何的系统去。
# 在救援服务器执行
installimage
# 选择 ubuntu 最新版本
# 关闭 SWRAID 设置为 0
# 其他的用默认设置就行，按 f10 保存，然后会提示你格式化硬盘
# 默认是安装在 DRIVE1 硬盘上，进入系统可以格式化其他的硬盘挂载为数据盘
安装配置
## ======================================================
## Hetzner Online GmbH - installimage - standard config
## ======================================================
## ====================
## HARD DISK DRIVE(S):
## ====================
## PLEASE READ THE NOTES BELOW!
# Device Model: SAMSUNG MZVLB512HBJQ-00000, Serial Number: S4GENF1N241503
DRIVE1 /dev/nvme0n1
# Device Model: SAMSUNG MZVLB512HBJQ-00000, Serial Number: S4GENF1N241470
DRIVE2 /dev/nvme1n1
# Device Model: TOSHIBA KHK61RSE1T92, Serial Number: 89HS101VTXGQ
DRIVE3 /dev/sda
## if you dont want raid over your three drives then comment out the following line and set SWRAIDLEVEL not to 5
## please make sure the DRIVE[nr] variable is strict ascending with the used harddisks, when you comment out one or more harddisks
## ===============
## SOFTWARE RAID:
## ===============
## activate software RAID? < 0 | 1 >
SWRAID 1
## Choose the level for the software RAID < 0 | 1 | 5 | 10 >
SWRAIDLEVEL 5
## ==========
## HOSTNAME:
## ==========
## which hostname should be set?
##
HOSTNAME Ubuntu-2204-jammy-amd64-base
## ================
## NETWORK CONFIG:
## ================
# IPV4_ONLY no
## =============
## MISC CONFIG:
## =============
USE_KERNEL_MODE_SETTING yes
## ==========================
## PARTITIONS / FILESYSTEMS:
## ==========================
## define your partitions and filesystems like this:
##
## PART <mountpoint/lvm/btrfs.X> <filesystem/VG> <size in MB>
##
## * <mountpoint/lvm/btrfs.X>
## mountpoint for this filesystem *OR*
## keyword 'lvm' to use this PART as volume group (VG) for LVM *OR*
## identifier 'btrfs.X' to use this PART as volume for
## btrfs subvolumes. X can be replaced with a unique
## alphanumeric keyword
## NOTE: no support btrfs multi-device volumes
## NOTE: reiserfs support is deprecated and will be removed in a future version
## * <filesystem/VG>
## can be ext2, ext3, ext4, btrfs, reiserfs, xfs, swap *OR* name
## of the LVM volume group (VG), if this PART is a VG.
## * <size>
## you can use the keyword 'all' to assign all the
## remaining space of the drive to the *last* partition.
## you can use M/G/T for unit specification in MiB/GiB/TiB
##
## notes:
## - extended partitions are created automatically
## - '/boot' cannot be on a xfs filesystem
## - '/boot' cannot be on LVM!
## - when using software RAID 0, you need a '/boot' partition
##
## example without LVM (default):
## -> 4GB swapspace
## -> 1024MB /boot
## -> 10GB /
## -> 5GB /tmp
## -> all the rest to /home
#PART swap swap 4G
#PART /boot ext2 1024M
#PART / ext4 10G
#PART /tmp xfs 5G
#PART /home ext3 all
#
##
## to activate LVM, you have to define volume groups and logical volumes
##
## example with LVM:
#
## normal filesystems and volume group definitions:
## -> 1024MB boot (not on lvm)
## -> all the rest for LVM VG 'vg0'
#PART /boot ext3 1024M
#PART lvm vg0 all
#
## logical volume definitions:
#LV <VG> <name> <mount> <filesystem> <size>
#
#LV vg0 root / ext4 10G
#LV vg0 swap swap swap 4G
#LV vg0 home /home xfs 20G
#
##
## to use btrfs subvolumes, define a volume identifier on a partition
##
## example with btrfs subvolumes:
##
## -> all space on one partition with volume 'btrfs.1'
#PART btrfs.1 btrfs all
##
## btrfs subvolume definitions:
#SUBVOL <volume> <subvolume> <mount>
#
#SUBVOL btrfs.1 @ /
#SUBVOL btrfs.1 @/usr /usr
#SUBVOL btrfs.1 @home /home
#
## your system has the following devices:
#
# Disk /dev/nvme0n1: 512.12 GB (=> 476.94 GiB)
# Disk /dev/nvme1n1: 512.12 GB (=> 476.94 GiB)
# Disk /dev/sda: 1.93 TB (=> 1.75 TiB)
#
## Based on your disks and which RAID level you will choose you have
## the following free space to allocate (in GiB):
# RAID 0: ~1428
# RAID 1: ~476
# RAID 5: ~952
#
PART swap swap 32G
PART /boot ext3 1024M
PART / ext4 all
## ========================
## OPERATING SYSTEM IMAGE:
## ========================
## full path to the operating system image
## supported image sources: local dir, ftp, http, nfs
## supported image types: tar, tar.gz, tar.bz, tar.bz2, tar.xz, tgz, tbz, txz
## examples:
#
# local: /path/to/image/filename.tar.gz
# ftp: ftp://<user>:<password>@hostname/path/to/image/filename.tar.bz2
# http: http://<user>:<password>@hostname/path/to/image/filename.tbz
# https: https://<user>:<password>@hostname/path/to/image/filename.tbz
# nfs: hostname:/path/to/image/filename.tgz
#
# for validation of the image, place the detached gpg-signature
# and your public key in the same directory as your image file.
# naming examples:
# signature: filename.tar.bz2.sig
# public key: public-key.asc
IMAGE /root/.oldroot/nfs/install/../images/Ubuntu-2204-jammy-amd64-base.tar.gz
出现下面的就是安装完成了
Hetzner Online GmbH - installimage
Your server will be installed now, this will take some minutes
You can abort at any time with CTRL+C ...
: Reading configuration done
: Loading image file variables done
: Loading ubuntu specific functions done
1/16 : Deleting partitions done
2/16 : Test partition size done
3/16 : Creating partitions and /etc/fstab done
4/16 : Creating software RAID level 5 done
5/16 : Formatting partitions
: formatting /dev/md/0 with swap done
: formatting /dev/md/1 with ext3 done
: formatting /dev/md/2 with ext4 done
6/16 : Mounting partitions done
7/16 : Sync time via ntp done
: Importing public key for image validation done
8/16 : Validating image before starting extraction done
9/16 : Extracting image (local) done
10/16 : Setting up network config done
11/16 : Executing additional commands
: Setting hostname done
: Generating new SSH keys done
: Generating mdadm config done
: Generating ramdisk done
: Generating ntp config done
12/16 : Setting up miscellaneous files done
13/16 : Configuring authentication
: Setting root password done
done
: Enabling SSH root login with password done
14/16 : Installing bootloader grub done
15/16 : Running some ubuntu specific functions done
16/16 : Clearing log files done
INSTALLATION COMPLETE
You can now reboot and log in to your new system with the
same credentials that you used to log into the rescue system.
4. 挂载数据盘
如果关闭了 raid 就需要格式化其他的硬盘用作数据盘